Description Properties    
Pad Size Backing Pad Products Part #
Swirl Removal
Orange Light Cutting Foam Pad
Firm, high density foam for scratch and defect removal. Use this pad with polishes and swirl removers. It’s an all around pad that will work on most light to moderate imperfections.
6.5" 5 or 6 inch Flexible Backing Plate Apply moderate swirl removers and light compounds. Examples are XMT Intermediate Swirl Remover, Menzerna Intensive Polish, and Meguiars #9 Swirl Remover. COBRA-36-910
Polishing White Polishing Foam Pad
Less dense foam formula for the application of waxes, micro-fine polishes and sealants. This pad has very light cutting power so its perfect for pre-wax cleaners.
6.5" 5 or 6 inch Flexible Backing Plate Apply polishes, prewax cleaners, polishes, and light swirl removers. Examples are Optimum Polish, Pinnacle Advanced Finishing Polish, and XMT Fine Swirl Remover. COBRA-36-915
Finishing Gray Finishing Foam Pad
Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of paste and liquid waxes, sealants, and glazes.
6.5" 5 or 6 inch Flexible Backing Plate Apply waxes, prewax cleaners, sealants, and glazes. Examples are DP Max Wax and Pinnacle Paintwork Cleansing Lotion. COBRA-36-950
  Blue Finessing Foam Pad
The blue pad has soft composition for applying glazes, sealants, and liquid waxes. The finessing pad provides full contact with paint surface to minimize the pressure applied by the user.
6.5" 5 or 6 inch Flexible Backing Plate Apply waxes, sealants, and glazes. Examples are Pinnacle Liquid Souveran and Meguiars Hand Glaze. COBRA-36-940
  Red Ultrasoft Wax/Sealant Foam Pad
This soft, imported foam is ideal for applying the final coat of wax or sealant. The foam works especially well when applying liquid waxes or sealants because it is firm enough to keep the majority of the product on the paint, rather than soaking it up. The red foam has no cut or cleaning ability.
6.5" 5 or 6 inch Flexible Backing Plate Use glazes, sealants, and liquid waxes. Examples include Menzerna Finishing Glaze and Wolfgang Deep Gloss Paint Sealant. COBRA-36-960

Pad Care:

Wash foam pads in a mixture of Cobra Quik Clenz and water. Soak the pads for up to 15 minutes and agitate with a Foam Conditioning Brush if needed. Rinse and lay flat to dry. Lay the pads foam down on a clean surface to allow water to drain away from the hook and loop adhesive. Store pads in their resealable plastic bags.

Auto Geek Home Auto Geek Auto Detailing Forum Auto Geek Auto Detailing Tips Customer Service Contact Us Price Match Policy View Cart Printer Friendly Version AutoGeek offers Quality Car wax, Car Care Products, Detailing Supplies and Car Accessories Shop Cobra Cross Groove Flex Foam Buffing Pads